-
Venetian Blind: The
1006 Series is available with the option of a 5/8” or a 1” blind. The blind
is located on the room side of the screen mesh. (See 5/8"
Blind Specifications or 1" Blind
Specifications for details.) The blind and associated hardware are factory
installed onto the screen frame. This eliminates all concerns about measuring
for proper blind size. The blind’s headrail, sillrail, cords, ladders, and
components are color coordinated with the blinds 16 standard colors. The
blind’s sillrail is held in place with hold-down pins to prevent the blind
from blowing around in the wind when the window sash is opened. The tilt
control mechanisms are installed out of view, behind the screen frame. The
tilt control knob is color coordinated to match the screen frame and is located
on the face of the frame, 4 ½ “ from the sill, on either the right or the
left. The tilt control incorporates a slip clutch mechanism to minimize damage
due to over-tilting the blinds. The lift cords are located on the room
side of the screen mesh. This allows the blinds to be raised, lowered, and held
in position by means of a cordlock. The cords must hang independent of each
other with a tassel attached to the end of each cord.
|
